Single step mode

Posted by tiffanylewis on May 13, 2019; 2:45pm
URL: http://astroimagej.170.s1.nabble.com/Single-step-mode-tp1152.html

I have some experience using AIJ from a recipe tuned to the setup at my previous institution.  I recently moved an am trying to reduce transit data on a mac with HighSierra.  I have all of the calibration done.  The images I work with tend to evade the auto-placement in multi-aperture analysis from time to time, and I have found it is easier to run it in single step mode than fight with the automatic progression.  Currently however, the data processor does not pause for me to replace the apertures, but proceeds as if the 'single step mode' box is not checked.  

I tried closing out the program and restarting. I tried loading the images in turn, as a stack and a virtual stack.  If I just open one of the loaded images, and start the multi-aperture from outside the data processor, then I cannot advance the images.  I'm sure I'm missing something, but I don't know what else to try, other than going back to trying to pause the automatic analysis every few images to move the apertures, which is incredibly frustrating.