Multi-aperture sequence stops when star not found

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Multi-aperture sequence stops when star not found

David Emory
When using the multi-aperature photometry with a sequence of images, the processing stops on the images after the first image if all the stars cannot be found. When this happens, the only option is to stop.

As an example, on image one, I ID 100 stars, then right-click. The first image is processed, and I can left-click to advance to the next image. I then ID the first star, get all the apertures set and then left-click for all the remaining images.

The problem arises when a star is not found (it can find 99 out of 100). Processing stops at that time, and I cannot recovery anything. It would be good if there is a way for the program to put in an error code and go to the next star and continue the processing.
Reply | Threaded
Open this post in threaded view
|

Re: Multi-aperture sequence stops when star not found

karenacollins
Administrator
Hi David,
    The way to handle this properly is to align the images first using a few bright stars using Process->'Align stack using apertures' in the menus above the image stack (this feature works similar to Multi-aperture). After you finish alignment, run Multi-aperture using the full set of stars you are interested in. When you place the apertures on the first image, make sure the the centroid feature is turned on as usual, BUT before you left-click to advance to the second image, turn the centroid function off (there is an icon above the image to do this - it looks like an offset circle - make sure it looks "un-depressed"). Then, left click to process the rest of the images.

Since centroid will not run on the remaining images, you should not have the problem you reported, and the aperture will be in the correct location since you used centroid on the first image and all images are now aligned.

This way, you know the aperture stays in the location you want it to be, even if a star fades to much into the sky background to find a centroid.

If I change AIJ to allow the processing to continue, the aperture may have wandered off to a nearby star without you realizing it. The above procedure should solve your problem and prevent erroneous data.

Let me know if you still have problems.
Karen
On 7/11/2013 4:26 PM, David Emory [via AstroImageJ] wrote:
When using the multi-aperature photometry with a sequence of images, the processing stops on the images after the first image if all the stars cannot be found. When this happens, the only option is to stop.

As an example, on image one, I ID 100 stars, then right-click. The first image is processed, and I can left-click to advance to the next image. I then ID the first star, get all the apertures set and then left-click for all the remaining images.

The problem arises when a star is not found (it can find 99 out of 100). Processing stops at that time, and I cannot recovery anything. It would be good if there is a way for the program to put in an error code and go to the next star and continue the processing.


If you reply to this email, your message will be added to the discussion below:
http://astroimagej.1065399.n5.nabble.com/Multi-aperture-sequence-stops-when-star-not-found-tp55.html
To start a new topic under AstroImageJ, email [hidden email]
To unsubscribe from AstroImageJ, click here.
NAML

Reply | Threaded
Open this post in threaded view
|

Re: Multi-aperture sequence stops when star not found

David Emory
Thanks Karen, I will try it tomorrow.

Since the second edition of the user's manual does not have the section on multi-aperiture photometry completed, I am using the first edition and trying to figure out the changes.

One more question. In the first edition it shows a screen that allows me to choose to have or not have all the data from one image on a single line. I think it is the screen that pop-ups when I click the multi-aplitude button (I am on a computer without AIJ). I think I want the data from each star to be on its own line. Where in the updated version can I find this option?
 
Thanks
Reply | Threaded
Open this post in threaded view
|

Re: Multi-aperture sequence stops when star not found

karenacollins
Administrator
Hi David,
    This option doesn't exist any longer since it would be incompatible with many of the new plotting features that depend on the data being in the current format (one line per image). Hopefully this means you will just need to scroll right rather than scroll down.
    There is a table transpose feature that might get you closer to what you are looking for. To use that, run Multi-Aperture as normal and it will produce the very long lines. Then, with Multi-Plot open, go to Multi-plot Main->Table->Transpose currently selected table. This will make each column in the table a row. See if that is close to what you need.

Karen


On 7/11/2013 9:24 PM, David Emory [via AstroImageJ] wrote:
Thanks Karen, I will try it tomorrow.

Since the second edition of the user's manual does not have the section on multi-aperiture photometry completed, I am using the first edition and trying to figure out the changes.

One more question. In the first edition it shows a screen that allows me to choose to have or not have all the data from one image on a single line. I think it is the screen that pop-ups when I click the multi-aplitude button (I am on a computer without AIJ). I think I want the data from each star to be on its own line. Where in the updated version can I find this option?
 
Thanks


If you reply to this email, your message will be added to the discussion below:
http://astroimagej.1065399.n5.nabble.com/Multi-aperture-sequence-stops-when-star-not-found-tp55p57.html
To start a new topic under AstroImageJ, email [hidden email]
To unsubscribe from AstroImageJ, click here.
NAML